م.سوّاح
22-07-2006, 08:48 AM
سوف أقوم بوضع جميع أوراق العمل الخاصه بالمشاركين بالمؤتمر وذلك بحسب طلباتكم.
فقط أختاروا المحاضره وسوف أقوم بوضعها لكم
وهنا سوف أقوم بوضع أسماء المشاركين :
Keynote Speech (1
Current Quality- Related Issues in Metrology
Dr Pavel Klenovsky
General Director, Czech Metrology Institute
____________________________________
Aviation Fuel Hydrant Leak Detection -A real world (2
measurement challenge
Albert Bates
Senior Technical Consultant, AIRBP
___________________________________
Easy Migration from old to new future (3
safe technology for Tank Gauging
Johan Sandberg- Saab Rosemount Tank gauging
___________________________________
Documentation for and Assessment of (4
minimally staffed Test and Calibration Laboratories
Raj Nathan & B.N. Taranath,
International Accreditation Service Inc
_________________________________
Design Considerations for a New Primary Standards Temperature Laboratory (5
N. Willgress
Fluke Precision Measurement UK,
Hart Scientific Division.
________________________________
Honeywell Wireless Technology-Industrial Wireless (6
Technology for the 21st Century
Mohsen Sorour
Industrial Measurement and Control
Honeywell Middle East
_____________________________
7) Keynote Speech
Paper Title: The Benefits of Accreditation
Mr. John Wilson
Chairman
The South African National Accreditation System
__________________________
Experiences in Performing the metrological (8
audits of the large gas and oil companies
Dr. Jiri Tesar, Czech Metrology Institute, Czech Republic
___________________________
Introduction to Metrology Services (9
Dr. Marios Avraam, Globetech Laboratories
_________________________
The Fuel Systems Simulator-KLEOPATRA (10
Leszek Juchniewicz
Hansaconsult Ingenieures
_________________________
Estimation Techniques in the (11
Analysis of Comparison measurements
Dr. Chris Mitsas,
Hellenic Institute of Metrology, Greece
________________________
Measurement of an Image Principal (12
Components Understanding via Artificial Neural Networks
Dr. Ebrahim Gallaf
University of Bahrain, Kingdom of Bahrain
________________________
Signal Sourcing Requirements for Spectrum Analyzer Calibration (13
Mark Finch,
Fluke Europe B.V, Netherlands and
Paul Roberts, Fluke Precision Measurement Ltd. Norwich, UK.
_________________________
Conditioning Orifice Plate Technology: Taking the Standard to a new Level of Capability (14
Sandeep Nagpal
Mohd Jalal & Sons
_______________________
Aquamaster The next generation Electronic Water Meter (15
Santhosh Sukumaran,
ABB Technologies
______________________
Jordan Metrology System (16
Osama Melhem
____________________
Evaluating a remote Measurement Problem (17
John Wilson,
South African National Accreditation System Consultant Fluke Europe
_____________________
A Power Engineer's Guide to navigating the EMC Directive (18
Mark Finch
Fluke Precision Measurement Ltd.
______________________
Natural gas Energy metering- Energy Metering at the Flow Measurement Station (19
Ananthanarayanan Sriram, Reed Mitchell, Barry Balzer & Paul Kizer,
ABB Total Flow, USA
_____________________
(20)
Electromagnetic Interference Analysis of a Transmission Line Magnetic Field on to nearby Buried Pipelines in Saudi Arabia
J. M. Bakhashwain, M. H. Shwehdi, Bandar J. Al-Qahtani,
KFUPM and Saudi Aramco
_____________________
The role of professional societies in the process of lifelong education ( 21
Mladen Jakovcic, Croatian Metrology Society, Croatia
___________________
Mass Calibration Today (22
Jesus Gomez, Mettler Toledo Gmbh
____________________
Environmental Application of TOC using patented Photocatalytic Oxidation Technique at (23 Room Temperature
Devraj Aiyer,
SGE India
___________________
Keynote Speech (24
Paper Title: The importance of Nanometrology for improving the product quality in Modern Industry
Prof. Dr. Herbert Osanna
Technische Universitat Wien, Austria
_______________________
(25)
Metrology Activities of BSMD under Ministry of Industry and Commerce, Kingdom of Bahrain
Mrs. Mona Kadhem Alalawi and Mr. Mohammed Kutty
___________________________
Setting the standards for Automation (26:
Benefits of Instrumented Safety Integrated Systems
Dr. Mohamed Salman
Yokogawa Middle East
_________________________
(27)
Nonlinear System State Measurement In Presence of Disturbance ( A nonlinear Artificial Neural Networks Approach)
Dr. Ebrahim Gallaf
University of Bahrain and
Mr. Amin Mohamed Sultan
Aluminium Bahrain
________________________
Common Problems in Achieving Maximum Performance from Dry-Well Thermometer (28
Mike Hirst
Fluke, Hart Scientific Division, USA
_________________________
GC Pyrolysis for the petrochemical and Polymer industry (29
Devraj Aiyer, SGE India
__________________________
Equipment Qualification and Process ValidationProcess Validation (30
Jesus Gomez, Mettler Toledo Gmbh
___________________________
Rosemount Orifice Plate in “Wet Gas (31”
Sandeep Nagpal
Mohd Jalal & Sons
__________________________
Metrology in Daily Use (32
Jesus Gomez, Mettler Toledo Gmbh
___________________________
Regional Measurement System (33
Omar Kankariya
Standardisation Organisation for GCC
GSO-Saudi Arabia
____________________________
Orifice Metering for Fiscal /Custody Transfer Measurement (34
V. Parameswaran, Bahrain Petroleum Company
_____________________________
وأرجوا أن تعم الفائده للجميع
وشكرا
فقط أختاروا المحاضره وسوف أقوم بوضعها لكم
وهنا سوف أقوم بوضع أسماء المشاركين :
Keynote Speech (1
Current Quality- Related Issues in Metrology
Dr Pavel Klenovsky
General Director, Czech Metrology Institute
____________________________________
Aviation Fuel Hydrant Leak Detection -A real world (2
measurement challenge
Albert Bates
Senior Technical Consultant, AIRBP
___________________________________
Easy Migration from old to new future (3
safe technology for Tank Gauging
Johan Sandberg- Saab Rosemount Tank gauging
___________________________________
Documentation for and Assessment of (4
minimally staffed Test and Calibration Laboratories
Raj Nathan & B.N. Taranath,
International Accreditation Service Inc
_________________________________
Design Considerations for a New Primary Standards Temperature Laboratory (5
N. Willgress
Fluke Precision Measurement UK,
Hart Scientific Division.
________________________________
Honeywell Wireless Technology-Industrial Wireless (6
Technology for the 21st Century
Mohsen Sorour
Industrial Measurement and Control
Honeywell Middle East
_____________________________
7) Keynote Speech
Paper Title: The Benefits of Accreditation
Mr. John Wilson
Chairman
The South African National Accreditation System
__________________________
Experiences in Performing the metrological (8
audits of the large gas and oil companies
Dr. Jiri Tesar, Czech Metrology Institute, Czech Republic
___________________________
Introduction to Metrology Services (9
Dr. Marios Avraam, Globetech Laboratories
_________________________
The Fuel Systems Simulator-KLEOPATRA (10
Leszek Juchniewicz
Hansaconsult Ingenieures
_________________________
Estimation Techniques in the (11
Analysis of Comparison measurements
Dr. Chris Mitsas,
Hellenic Institute of Metrology, Greece
________________________
Measurement of an Image Principal (12
Components Understanding via Artificial Neural Networks
Dr. Ebrahim Gallaf
University of Bahrain, Kingdom of Bahrain
________________________
Signal Sourcing Requirements for Spectrum Analyzer Calibration (13
Mark Finch,
Fluke Europe B.V, Netherlands and
Paul Roberts, Fluke Precision Measurement Ltd. Norwich, UK.
_________________________
Conditioning Orifice Plate Technology: Taking the Standard to a new Level of Capability (14
Sandeep Nagpal
Mohd Jalal & Sons
_______________________
Aquamaster The next generation Electronic Water Meter (15
Santhosh Sukumaran,
ABB Technologies
______________________
Jordan Metrology System (16
Osama Melhem
____________________
Evaluating a remote Measurement Problem (17
John Wilson,
South African National Accreditation System Consultant Fluke Europe
_____________________
A Power Engineer's Guide to navigating the EMC Directive (18
Mark Finch
Fluke Precision Measurement Ltd.
______________________
Natural gas Energy metering- Energy Metering at the Flow Measurement Station (19
Ananthanarayanan Sriram, Reed Mitchell, Barry Balzer & Paul Kizer,
ABB Total Flow, USA
_____________________
(20)
Electromagnetic Interference Analysis of a Transmission Line Magnetic Field on to nearby Buried Pipelines in Saudi Arabia
J. M. Bakhashwain, M. H. Shwehdi, Bandar J. Al-Qahtani,
KFUPM and Saudi Aramco
_____________________
The role of professional societies in the process of lifelong education ( 21
Mladen Jakovcic, Croatian Metrology Society, Croatia
___________________
Mass Calibration Today (22
Jesus Gomez, Mettler Toledo Gmbh
____________________
Environmental Application of TOC using patented Photocatalytic Oxidation Technique at (23 Room Temperature
Devraj Aiyer,
SGE India
___________________
Keynote Speech (24
Paper Title: The importance of Nanometrology for improving the product quality in Modern Industry
Prof. Dr. Herbert Osanna
Technische Universitat Wien, Austria
_______________________
(25)
Metrology Activities of BSMD under Ministry of Industry and Commerce, Kingdom of Bahrain
Mrs. Mona Kadhem Alalawi and Mr. Mohammed Kutty
___________________________
Setting the standards for Automation (26:
Benefits of Instrumented Safety Integrated Systems
Dr. Mohamed Salman
Yokogawa Middle East
_________________________
(27)
Nonlinear System State Measurement In Presence of Disturbance ( A nonlinear Artificial Neural Networks Approach)
Dr. Ebrahim Gallaf
University of Bahrain and
Mr. Amin Mohamed Sultan
Aluminium Bahrain
________________________
Common Problems in Achieving Maximum Performance from Dry-Well Thermometer (28
Mike Hirst
Fluke, Hart Scientific Division, USA
_________________________
GC Pyrolysis for the petrochemical and Polymer industry (29
Devraj Aiyer, SGE India
__________________________
Equipment Qualification and Process ValidationProcess Validation (30
Jesus Gomez, Mettler Toledo Gmbh
___________________________
Rosemount Orifice Plate in “Wet Gas (31”
Sandeep Nagpal
Mohd Jalal & Sons
__________________________
Metrology in Daily Use (32
Jesus Gomez, Mettler Toledo Gmbh
___________________________
Regional Measurement System (33
Omar Kankariya
Standardisation Organisation for GCC
GSO-Saudi Arabia
____________________________
Orifice Metering for Fiscal /Custody Transfer Measurement (34
V. Parameswaran, Bahrain Petroleum Company
_____________________________
وأرجوا أن تعم الفائده للجميع
وشكرا